single output 600W 12V 50A switching power supply with fan and cover

Output Voltage

Rated Current

Current Range

Rated Power

Ripple & Noise

Adjustable Output Range

11.4~12.6V

Output Accuracy

±1%

Line Regulation

±0.5%

Load Regulation

±1%

Set up,Rise,Keep up time

300ms, 20ms, 12ms

Input Voltage Range

100~240V AC

Input Current

7.6A/115V,3.8A/230V

Input Frequency

47~63Hz

Efficiency

PF＞0.98/115V  PF＞0.95/230V

Inrush Current

Leakage Current

<0.5mA@240V

Over Load Protection

105~150%,Hiccup protection,automatic recovery

Short Circuit Protection

Locked protection,return to normal after restart

＞120% Shut down,Locked protection,return to normal after restart

Over-temperature protection

TS1 position＞105℃  it will be protection,then automatic recovery

Environment

Working Temp.,Humidity

-20~70℃,10~90% RH,No condensation

Storage Temp.,Humidity

-20~85℃,10~95% RH

Temp.,Drift

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min /1cycle,PERIOD FOR 60min EACH AXES

Safety&EMC Standards

Safety Standards

GB4943,EN60950

Withstand Voltage

I/P-O/P:3KV;I/P-FG:1.8KV;O/P-FG:0.6KV AC 1min

Insulation Resistance

I/P-O/P,I/P-FG,O/P-FG:500VDC / 100M Ohms

EMC Standards

EN55015

168*82*60mm(L*W*H)

＞50K hrs

12V@0.3A for driving a fan,tolerance±15%

1. All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;

2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;

3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;

4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;

5. Load regulation: the measured output load from 0 to 100% load change measured.