Motor drivers power supply dual 12V 20A and 5V 10A SMPS 300W

Parameter

Item No.

K10L-S300D12+5

CH1

CH2

Output

Output Voltage

+12V

+5V

Rated Current

20A

10A                

Current Range

0.2-20A

0.2-10A

Rated power

290W

Ripple

120mVp-p

150mVp-p

Adjustable output range

10.8-13.2V

------

Output Accuracy

±1%

±5%

Line Regulation

±0.5%

±1%

Load Regulation

±0.5%

±4%

Set up,Rise,Keep up time

2s,50ms,20ms

Input

Input Voltage range

90~132V AC,176-264vac ,200-360VDC 

Input current

6A/115V,3A/230V AC

Input frequency

47~63Hz

Efficiency

Inrush current

COLD START 50A/230VAC,25A@115VAC

Leakage Current

<0.5mA/240VAC

Protection

Over load protection

105~150%,Hiccup protection, automatic recovery.

Output over voltage

120~140%,hiccup protection,automatic recovery.

Environment

Working Temp.,Humidity

-20~60℃，10~90% RH，No condensation

Storage Temp.,Humidity

-20~85℃，10~95% RH

Temp.,Drift

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES

Safety&EMC Standards

Safety standards

GB4943

Pressure

I/P-O/P:1.5KV;I/P-FG:1.5KV;O/P-FG:0.5KV AC 1min.

Insulation resistance

I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms

EMC standards

Others

Dimension

215*115*30mm

Weight

0.5Kg/pc

Notes

1. All parameters 220VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;

2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;

3. RippleTest:30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;

4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;

5. Load regulation: the measured output load from 20% to 100% load change measured, other load is fixed at 60% of the load;