+86 18824706559

New Products

DC12V 10A plastic switching power supply 120W

CCC certificated 120W plastic power supply with ultra-thin size,the height is 24.5mm,DC24V 36V and 48V also are available.No load/standby consumption wattage<0.2W

  • Brand:

  • Item NO.:

  • Product Origin:

  • Shipping Port:

    Guangzhou port
  • Lead Time:

    2 days for stocks; 7-10 days for samples
Product Details

Cabinet light Power Supply 120W 


Plastic power supply 120W ,it is with the plastic cover,and with the active PFC,now it is widely used to the cabinet lights.


1, 120W Switching power supply with High efficiency, low temperature rise;
2, 12V 10A power supply with Built-in filters, low output noise;
3, cabinet power supply 120W with Wide range of AC input voltage;
4, 120W plastic power supply with Short circuit, overload, over-temp. protection;

5, No load/standby consumption wattage<0.2W

            Item No GS19012-12 GS19012-24 GS19012-36 GS19012-48

Output Voltage

+12V +24V +36V +48V

Rated Current

10A 5A 3.3A 2.5A

Current Range

0-10A 0-5A 0-3.3A 0-2.5A

Rated Power

120W 120W 118.8W 120W
Rated power 120W 120W 118.8W 120W


120mVp-p 240mVp-p
360mVp-p 480mVp-p

Adjustable Output Range


/ / /

Output Accuracy


Line Regulation


Load Regulation


Set up,Rise,Keep up time

500ms, 50ms, 12ms/230VAC


Input Voltage Range

90~264V AC,100~370VDC

Input Current


Input Frequency



92% 92% 92% 92%

Inrush Current


Leakage Current



Over Load Protection

105~180%,Hiccup,automatic recovery

Over temp. Protection

when TS1 position>105 degree,it will be protected,then automatic recovery.


Working Temp.,Humidity

-10~40℃,10~90% RH,No condensation

Storage Temp.,Humidity

-20~85℃,10~95% RH




10~500Hz, 2G 10min /1cycle, PERIOD FOR 60min EACH AXES

Safety&EMC Standards

Safety Standards


Withstand Voltage

I/P-O/P:3kv,I/P-FG:1.8KV,O/P-FG:0.6KV DC 1min

Insulation Resistance

I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms

EMC Standards

GB9254,EN55015 CLASS B

Others Dimension


Weight 0.4kg/PC

1.All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;

2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;

3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;

4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;

5. Load regulation: the measured output load from 0 to 100% load change measured.

Product picture:

120W plastic power supply


Q1. Can I have a sample order for power supply?
A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2: Do you accept OEM/ODM for the switching power supply?
A2: Yes. we do.

Q3:How about the quality?
A3:We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%

Q4:What is PFC?
A4:PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below: 
Apparent Power=Input Voltage x Input Current (VA) 
Real Power= Input Voltage x Input Current x Power Factor (W) 
Send a message

If you have any questions,please contact us,we will reply you as soon as possible.Looking froward to our kind cooperation in the near future! Thanks!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Contact Us
Address:2F BLDG8,Standard Ind.Park,Dongchong Town,Nansha District 511453 Guangzhou Guangdong China Tel:+86 020 39934402    Fax:+86 020 39934452 Cell Phone:+86 18824706559 E-mail:amy@gzkaihui.com

Copyright © Guangzhou Kaihui Electronics Co.,Ltd All Rights Reserved

Chat now

Live Chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!