CE ETL Medical standards open frame medical power supply 140W 200W for Ventilator

Output Voltage

Rated Current

Current Range

Rated Power(with cooling fan)

Ripple

Adjustable Output Range

22.8-25.2V

Output Accuracy

±1%

Line Regulation

±0.5%

Load Regulation

±0.5%

Set up,Rise,Keep up time

800ms, 30ms, 16ms/115VAC    300ms, 30ms, 50ms/230VAC

Input Voltage Range

88~264V AC,100~370VDC

Input Current

0.4A/115V,0.2A/230V

Input Frequency

47~63Hz

Efficiency

Inrush Current

Leakage Current

<0.3mA@240V

Over Load Protection

105~150%,Hiccup,automatic recovery

Over temp. Protection

when TS1 position>105 degree,it will be protected,then automatic recovery.

Environment

Working Temp.,Humidity

-20~70℃,10~90% RH，No condensation

Storage Temp.,Humidity

-20~85℃,10~95% RH

Temp.,Drift

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min /1cycle, PERIOD FOR 60min EACH AXES

Safety&EMC Standards

Safety Standards

GB4943,EN60950 EN62368

Withstand Voltage

I/P-O/P:4kv,I/P-FG:1.8KV,O/P-FG:0.6KV DC 1min

Insulation Resistance

I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms

EMC Standards

GB9254,EN55022 CLASS B,EN60601

101.6*50.8*30mm(L*W*H)

1. All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity;

2. Accuracy: includes set up tolerance, line regulation, load regulation and so on;

3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end;

4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;

5. Load regulation: the measured output load from 0 to 100% load change measured.